2017 The Year For GIBIDI Automation

08453510781     from 9 to 4     07971475781

All Post To Mainland UK included in the price Ring Or Email For Price For Other Locations 

If you are in the uk the price you see is all you pay as we dont add shipping at check out....

All rams work with Gibidi f4+ or BA320 control panels

intensive-use-hydraulic-gate-rams
intensive-use-hydraulic-gate-rams
AT1400 RAM

AT1400 RAM

£704.16

£845.00 VAT & UK signed for postage 1 x Hydraulic intensive use ram 1400 cycles/locking/slow downThis ram is intended for intensive use with these features and specifications.Independent pressure safety valves in both directions of operation to ensure safety. Damping at both ends of stroke (standard) to reduce shock, avoid noise and remove necessity of external end-stops. Top quality long lasting brushless electric motors fitted with thermal cut-outs to avoid over-heating. Manual over-ride available for all locking systems to ensure access in case of power cut. Auto blocking options including internal hydraulic check valves and external hydraulic or electrical locks. All operators and hydraulic components designed, manufactured and extensively tested to exceed EU norms.Practically no maintenance.Max gate leaf size 3.5m Max opening time 11s and closing 13s Continuous use maximum is 27min, Max cycles per day 1400.

AT660 RAM

AT660 RAM

£546.66

£656.00 VAT & UK signed for postage Hydraulic intensive use ram. 600 cycles/locking/slow downThis ram is intended for intensive use with these features and specifications.Independent pressure safety valves in both directions of operation to ensure safety. Damping at both ends of stroke (standard) to reduce shock, avoid noise and remove necessity of external end-stops. Top quality long lasting brushless electric motors fitted with thermal cut-outs to avoid over-heating. Manual over-ride available for all locking systems to ensure access in case of power cut. Auto blocking options including internal hydraulic check valves and external hydraulic or electrical locks. All operators and hydraulic components designed, manufactured and extensively tested to exceed EU norms.Practically no maintenance.Max gate leaf size 4m Max opening time 23s and closing 25s Continuous use maximum is 27min, Max cycles per day 660.

1 X AT700 RAM

1 X AT700 RAM

£608.33

£730.00 VAT & UK signed for postage Hydraulic intensive use ram 700 cycles/locking/slow downThis ram is intended for intensive use with these features and specifications.Independent pressure safety valves in both directions of operation to ensure safety. Damping at both ends of stroke (standard) to reduce shock, avoid noise and remove necessity of external end-stops. Top quality long lasting brushless electric motors fitted with thermal cut-outs to avoid over-heating. Manual over-ride available for all locking systems to ensure access in case of power cut. Auto blocking options including internal hydraulic check valves and external hydraulic or electrical locks. All operators and hydraulic components designed, manufactured and extensively tested to exceed EU norms.Practically no maintenance.Max gate leaf size 5m Max opening time 24s and closing 26s Continuous use maximum is 40min, Max cycles per day 700.

intensive use motors for swing gates
This instruction manual is intended solely for use by qualified professionals.
The installation, electr
ical connections and adjustments must be made in accordance with the current legislation in each country.
Carefully read the instructions before starting to install the equipment. Incorrect installation can be dangerous.
Packing material (Plastic, expanded
polystyrene, etc.) should be disposed of without causing environmental damage and should be kept out of the
reach of children, as it is potentially dangerous.
Do not install electrical equipment in an explosive environment or atmosphere. The presence of g
as or inflammable fumes represents a severe
security risk.
Before installing the equipment, make all necessary modifications to the door/gate to ensure that there is no risk of crushin
g, cutting or any other
possible movement that could cause harm.
The man
ufacturer of the equipment is not responsible for the automated door/gate not meeting the relevant safety standards, nor for
the possible
deformations that could occur during use.
Safety devices (photo
-
electric cells, pneumatic strips, etc.) should be inst
alled in accordance with the current safety standards. These safety devices
should be installed such as to avoid any possible crushing, cutting or danger in general by the door/gate that is being autom
ated. Apply the relevant
warning sings as per the curre
nt standards to indicate the potential danger areas.
Each installation should have clearly visible identification information of the automated door/gate.
Install a two
-
pole switch at the power supply to turn off the supply in case of emergency.
Check that
there is a differential and thermal cut
-
out.
Always earth the equipment and the door/gate.

 

MACHINERY DIRECTIVE
According to the Machinery Directive (2006/42/EC)
The installer of a door/gate has the same obligations as the manufacturer of a machine and, as such, must :
-
Create a technical report for the motorised door/gate which must include the documents specified in Appendix V of the Machinery Directive.
(This technical record should be conserved and made available to the relevant national authority
for at least ten years from the date of manufacture of the motorised door/gate.
-
Produce the CE conformity declaration for the motorised door/gate as per Appendix II
-
A of the Machinery Directive.
-
Put the CE mark on the motorised door/gate as per clause 1.7.
3 of Appendix I of the machinery Directive.

 

tensive use swing gate motors
tensive use swing gate motors