2018 The Year For GIBIDI Automation

Office 01773 719347       Sales 08453 510781     from 9 to 5     Accounts 08453 510780        Adrian 07971 475781

All Post To Mainland UK included in the price Ring Or Email For Price For Other Locations 

If you are in the uk the price you see is all you pay as we dont add shipping at check out....



 


 Trade Enquiries Welcome

81300 Gibidi floor 830 motor

81300 Gibidi floor 830 motor

£429.16

£515.00 inc VAT & UK signed for postageIN STOCKTHIS MOTOR IS THE REPLACEMENT FOR THE GIBIDI 810 MOTOR AS THIS IS THE GIBIDI 830 MOTOR BOTTOM BOSS IS INCLUDED

81324 Gibidi Floor 824 motor

81324 Gibidi Floor 824 motor

£537.08

£644.50 inc VAT & UK signed for postage IN STOCK For this Gibidi 824 motor This motor will fit the foundation boxes of the GIBIDI 810 / 830 / 812 making upgrading to new legislation as it will stop and reveres when used with the GIBIDI BA24 control panel This product is the new hydraulic operator to replace the FLOOR810.

Image description
Image description
A90131P This coupling can be used on the 810 MOTOR Bottom Boss

A90131P This coupling can be used on the 810 MOTOR Bottom Boss

£36.66

£44.00 inc VAT & UK signed for postage IN STOCK For this This coupling can be used on the 810 MOTOR Bottom Boss This coupling is the older coupling can be used on the Floor 810 and is compatible with the Floor 830 & Floor 824. It fits onto the spline output shaft of the hydraulic jack. This coupling wont normally break under pressure so in exes pressure the motor could give instead of the coupling

P9AW51570 Gibidi Floor 830 & 824 1 x Bottom Boss

P9AW51570 Gibidi Floor 830 & 824 1 x Bottom Boss

£40.83

£49.00 inc VAT & UK signed for postage IN STOCK For this Gibidi Floor 830 & 824 1 x Bottom Boss It fits onto the spline output shaft of the hydraulic jack's. This spline can give if gates are forced saving the motor. This bottom boss also fits the limit switch kit if needed as it has the holes for the screws of the gibidi limit switchesPaypal or Pay with a debit or credit cards

A90750P TOP BOSS This coupling can be used on the 810 , 812, 824 & 830 MOTOR'S

A90750P TOP BOSS This coupling can be used on the 810 , 812, 824 & 830 MOTOR'S

£36.25

£43.50 inc VAT & UK signed for postage IN STOCK For this coupling can be used on the 810 , 812, 824 & 830 MOTOR'S Top Boss This coupling is THE PART IS WELDED TO THE GATE!! WHAT YOU SEE IS WHAT YOU PAY INC P+P,

A90564P Bronze Bearing for 810, 830, 824, 812 motors

A90564P Bronze Bearing for 810, 830, 824, 812 motors

£37.79

£42.95 inc VAT & UK signed for postage IN STOCK For this bronze bush can be used on the hydraulic underground foundation boxes for all versions of Gibidi hydraulic underground. These models include : Modo 812, Modo 810, FLOOR 810, FLOOR 830 & FLOOR 824

Old 810 to new 830 replacement this is how to do it

1, Turn slot so its facing front

Image description

2, Remove 2 19mm nuts and slide motor out

3, Mark on back of the 810 foundation box where the 2 straps touch

Image description

4, with grinder cut out a bit of the foundation box to let the motor sit in the foundation box

Image description

5,  Cut just the right amount as you can see its not much..........

Image description

6, replace motor with the bottom boss in the correct place {the motor can do 180 deg so put the bottom boss in correct place for the gates to hit stops open and close.... replace 19mm bolts , wire as before, turn power off for 10 seconds then back on , give gates a command the gates should open,   {if they close swap lives over brown and black}

Image description
Image description
Image description
Image description
Image description

£0.00

£0.00

£0.00

£0.00

£0.00